(Note: vignette under construction!)

Model components are defined using a formula syntax that is similar
to `R-INLA`

but has some differences. The basic syntax is

`my_component_name`

is a user-chosen label for the model
component. This label is used in model summaries, to label relevant
parts of a fitted model object, and to access model components when
sampling from a model using `generate()`

and
`predict()`

.

The `main`

argument defines the input data for the
component. For example, an intercept-like component has a vector of ones
as an input. The linear effect of a covariate has the vector of
covariate values as an input. A 2-dimensional SPDE effect takes a
2-column matrix of coordinate locations as an input. This argument can
be a general `R`

expression, more details on this are below.
The `main`

argument doesn’t not need to be named. Other
arguments should normally be named, to avoid confusion.

The type of model component is specified using the `model`

component, (see `?component`

, and
`?INLA::inla.list.models()$latent`

).

Each component type has an associated `bru_mapper`

method
that takes `main`

as an input and constructs the component
design matrix. Users can also specify their own mapper methods (see
`?bru_mapper`

).

This syntax replaces the `INLA::f()`

function that has the
disadvantage that there is no clear separation between the name of the
covariate and the label of the effect, and the user often has to do a
substantial amount of pre-processing of data to construct relevant
inputs. The documentation for defining model components can be viewed at
`?component`

.

The rest of the vignette goes into more detail about defining model components and highlights some advantages of the syntax.

A linear additive predictor of a latent Gaussian model can be written as \[ \begin{equation} \eta(u)_i = u_0 + \sum_{k=1}^K a_{ik} u_{ik} , \end{equation} \] where \(u\) is a multivariate Gaussian vector, \(a_k\) are input information such as covariates or weights for random effects and \(i = 1, \ldots, n\). This can also be written as \(\eta(u) = Au\), where \(A\) is the model design matrix with \(i\)-th row \(\left[1, a_{i1}, \ldots, a_{iK}\right]\).

We can also conceptally think of the predictor as the sum of \(D\) model components, so that we partition
\(A = \left[A^{(1)} \cdots
A^{(D)}\right]\), and each component has an associated
**component design matrix** \(A^{(d)}\).

For example, if the component is an intercept parameter, then \(A^{(d)} = \left[1, \ldots,
1\right]^\intercal\). If the component is the linear effect of a
covariate \(z\) then \(A^{(d)} = \left[z_1, \ldots,
z_n\right]^\intercal\). For more complicated effects, such as
SPDE models, the component design matrix maps latent Gaussian parameters
to the predictor (also known as the “projector” matrix in this context).
The the construction of each \(A^{(d)}\) is handled automatically by
`bru_mapper`

methods, that define general (linear)
**component effects** \(\eta^{(d)}(u^{(d)}) = A^{(d)}
u^{(d)}\).

Each linear predictor is defined by \[ \eta(u^{(1)},\dots,u^{(D)}) = \sum_{d=1}^D \eta^{(d)}(u^{(d)}) = \sum_{d=1}^D A^{(d)} u^{(d)} . \] Non-linear predictors are defined by R expressions where the component label denotes the corresponding component effect.

Each component type has an associated method for converting the
information given in the component definition into a component design
matrix. The full model design matrix is then used internally in a call
`INLA::inla()`

to fit the model.

The advantage of specifying mapper methods is that it supports
automatic ‘stack building’. A key feature of `inlabru`

is
that the full model stack is constructed automatically from the
component definitions. The building blocks of the stack are built using
`bru_mapper`

methods.

The mapper for the 2D SPDE effect takes as an input a 2-column matrix of coordinates that represent the locations are which to evaluate the effect. The parameters of the SPDE component are defined at mesh nodes that may not be the same as the locations at which the effect should be evaluated.

The appropriate weights required to evaluate the effect at the
observation locations can be constructed using
`fm_evaluator()`

. The mapper for this model component takes
the information in the component definition, in this case the minimum
information required is an SPDE model object, and the 2-column matrix
that `main`

is evaluated to. The mapper then calls
`fm_evaluator()`

with appropriate arguments extracted from
this information.

(NOTE: Deliberately not going into huge detail here; the bru_mapper vignette will have more details.)

`main`

, `group`

, and
`replicate`

.The arguments `main`

, `group`

, and
`replicate`

can all take a general `R`

expression
as an input. This expression is then evaluated in an environment that
consists of the named variables in the data (note: for `sp`

objects this does *not* include the column names from the
`@coords`

slot, but does include the columns in
`@data`

).

If the names are not found in the data then the global environment is searched for objects of that name.

For example, suppose the data has columns named `x`

and
`y`

, then a 2D SPDE model component could be specified as

The expression `cbind(x,y)`

is internally evaluated in an
environment that contains the columns of the data, which includes the
variables `x`

and `y`

.

The full data object can be accessed using the `.data.`

key-word. An equivalent way to define the same component is

This keyword allows code to be written that works with arbitrarily named input data, rather than hardcoding with a specific name of a dataset that may change in future.

If the objects required to evaluate the R expression cannot be found
in the data, then the global environment is searched. This allows users
to access objects in the global environment, such as other
data-structures that may be of a different dimension to the response
data. This avoids the need to pre-process everything into a single
`data.frame`

.

The functionality of allowing general `R`

expressions can
be used to extend the types of data that can be passed to the
`bru()`

, `like()`

and `lgcp()`

functions. It is the basis for the support of spatial data structures
such as `sp`

objects, and there is also experimental support
to allow users to pass data as a list. `inlabru`

is thus
readily extendible, given appropriate functions to extract the relevant
information for each component, and associated mappers that convert this
information into a component design matrix.

In addition to the three main inputs, the optional
`weights`

argument also takes an R expression, and the result
is used to scale the component. This can be used for spatially varying
coefficient models, where the `weights`

argument provides the
covariate values.

`inlabru`

-specific component typesIn addition to the majority of latent models that can be defined
using `INLA::f()`

function (see
`INLA::inla.list.models()$latent)`

), `inlabru`

also has the following models: `'linear'`

,
`'fixed'`

, `'offset'`

, `'factor_full'`

and `'factor_contrast'`

).

There are a few shortcuts to defining model components. They are for

- Parameters that are the same for all predictor evaluations (intercept-like parameters).
- Using a covariate stored in an
`sp`

`Spatial*`

or`terra`

`SpatRaster`

object. - Defining linear effects using an
`lm`

-style syntax. - Behaviour for if
`main`

,`group`

or`replicate`

is a function given with no arguments.

The syntax

can be used as a shortcut for

where `n`

is the length of the predictor vector. Note that
this shortcut makes an assumption about the approriate length of the
predictor. For many models this can be easily deduced by inspecting
input data, but this is not always the case, for example if the response
and covariate data are of different dimensions or for joint likelihood
models with shared components.

`sp`

covariatesIf `main`

, `group`

, or `replicate`

,
is the name of an `Spatial*`

or `SpatRaster`

object stored in the global `R`

environment, then
`inlabru`

attempts to do something intelligent by extracting
the covariate information at the locations of the data passed to
`bru()`

or `like()`

. This **requires that
this data is a SpatialPoints* or sf
object**. For

`Spatial*`

inputs, `inlabru`

does this by applying `sp::coordinates()`

to the data and
then extracting the covariate information using
`sp::over()`

.The shorcut

internally calls `eval_spatial()`

which is almost
equivalent to

```
get_sp_covariate <- function(df) {
locs <- coordinates(df)
over(locs, an_sp_object)[, 1]
}
~ my_sp_effect(
main = get_sp_covariate(.data.),
model = "linear"
)
```

Note that this requires `a_spatial_object`

to be stored in
the global `R`

environment (or in the environment associated
with the model definition code) so it is findable when the expression is
internally evaluated by `inlabru`

. Also note that the
`get_sp_covariate`

function above extracts the first column
of the `sp`

object evaluation. For more general situations,
one can either specify the optional `main_layer`

argument to
extract another named or indexed column, or directly use
`main = eval_spatial(a_spatial_object, .data., layer = some_layer)`

.

Note that this assumes that `coordinates()`

applied to the
input data is a sensible thing to do, this might not be the case for all
models! For example, if the input data is a
`SpatialPolygonsDataFrame`

then `coordinates()`

returns the centroid of each polygon. As more specific input type
support is developed, and support for `sp`

is gradually
deprecated in favour of `sf`

and `terra`

, these
special cases may be given more precise meaning.

`lm`

-style syntaxSince `inlabru`

version 2.5.0, a feature has been added to
allow users to specify linear fixed effects using a formula as input.
This uses the `model = 'fixed'`

component type. The syntax
is

where the data has columns named `x1`

, `x2`

,
`x3`

, and `x4`

. In this case, `inlabru`

creates the design matrix for this component by running

This allows users to define interactions in a concise way, by
utilising the functionality already supported by the
`MatrixModels`

package. The formula is interpreted in the
conventional way, `x1:x2`

is the interaction of covariates
`x1`

and `x2`

, not including their individual
fixed effects, and `x3:x4`

is the interaction of
`x3`

and `x4`

inclusive of the individual fixed
effects `x3`

and `x4`

. Note that for
implementation technical reasons, the estimated parameters appear in
`'summary.random'`

instead of the normal
`'summary.fixed'`

part of the
`inla`

/`bru`

output object.

The alternative to using this shortcut would be for the user to define and name individual components for each term in the formula.

If `main`

, `group`

, or `replicate`

are given as a function with no covariates, then this function is
applied to the data. For example,

is equivalent to

`inlabru`

supports non-linear predictors, where \(\tilde{\eta}(u,v)\) is a non-linear
function of \(\eta_u\) and \(\eta_v\). It is important to note that the
mapping each component effect vector \(\eta_u=A^{(u)} u\) happens
**before** the non-linear function is applied. So, for
example, if \(\tilde{\eta}(u,v) = \exp(\eta_u
+ \eta_v)\) then this is evaluated as \(\exp(A^{(u)} u + A^{(v)} v)\).